ETC Eos v1.3 - Manual (Page 328)

314 Eos Operations Manual
Base Station Receiver
The receiver includes a USB type B connector and an Ethernet connector (IEEE 802.3af) on the
front of the unit for connection to the console (USB) or to a switch in your Net3 network
USB .
Push
When the base station is connected directly to a console by USB type B, the
RFR is powered by and controls only the console the base station is connected
to. ETC supplies a 1.8m (6 ft.) USB cable for base station connection to a
console or USB hub. The maximum distance between products is 5m (16 ft.).
When the base station is connected to Eos using USB, the RFR remote will
automatically connect to that console when powered.
Ethernet
N o t e : If multiple RFR units are to be used separately within a range of each other’s
receiver units, change the frequency and/or group settings to avoid conflicts.
Reference Change Frequency and Group Setting below for more information.
For optimal operation, set the base stations apart by at least 5m (16 ft.) to ensure
the two units do not interfere with each other’s operation.