Basic use guidelines, Net3 services, Displays – ETC Eos v1.3 User Manual
Page 322
308
Eos Operations Manual
Basic Use Guidelines
Displays
The RPU can be used with either one or two DVI monitors. You can collapse/expand the CIA on the
displays by engaging the scroll lock and pressing F5. If you are using one monitor, you may find this
feature useful in increasing the efficiency of your available display area.
Net3 Services
By default, both Eos and the Eos RPU ship with all Net3 services enabled.
When used in a multi-console backup system, you must disabled Net3 services for the intended
backup device. If the RPU is the intended primary (recommended, see
), some Net3 services must be disabled on the intended backup device (console or RPU).
You must disable the DHCP server and TFTP server. You must also change the SNTP server to
“client” to enable time synchronization between Eos devices. All of this is done using the Eos
Configuration Utility (See
and