ETC Eos v1.3 - Manual (Page 154)

140 Eos Operations Manual
Recalling Presets
Channels must be selected when recalling a preset. If a selected channel or parameter has no
value in the preset, it will stay in its current position. If you want to recall all channels in a preset, you
can press [Group] [Preset] [x].
If you only want to recall certain parameters of the preset, select channels and enter the required
parameters (or those not required, using the [-] key) in the command line (see command examples
below).
When a preset is recalled, parameter changes will follow the manual timing defaults, if enabled. Any
preset which is contributing to live output from Eos is considered to be “active.”
You may recall presets using any of the following methods:
• {Preset direct select} - recalls the associated preset data for selected channels.
• [Preset] [2] [Enter] - recalls preset 2 for selected channels.
• [Channel List] [Preset] [2] [Enter] - recalls the preset data for the channels in the selection
list.
• [Channel List] [Color] [Preset] [5] [Enter] - recalls only the color data from the specified
preset for the specified channels.
• [Color] & {Preset direct select} - recalls just the color data from the specified preset for
selected channels.
• [Group] [Preset] [3] [at] [5] <0> [Enter] - recalls all channels in preset 3, and sets all intensity
values at 50%. The original intensity data is still linked to the preset. If the intensity change is
desired you must update the preset to maintain the change and the link, or make the data
absolute before storing to another record target.
• [Channel List] [Preset] [7] [Enter] [at] [/] [5] [Enter] - recalls preset 7 for selected channels.
Intensity values will be recalled at 50% of their recorded state. The intensity link is
maintained. If the intensity change is desired the user either needs to update the preset to
maintain the change and the link, or make the data absolute before storing to another record
target.
• [Group] [Preset] [9] [Enter] - recalls all channels in preset 9 to their stored preset values.
• [Group] & {Preset 2}- recalls all channels in preset 2 to their stored preset values.