ETC Eos v1.3 - Manual (Page 66)

52 Eos Operations Manual
Select the specific show file
• Navigate within the specified storage location and select the show file you wish to open, press
[Select].
• If the selected show has multiple time stamps, navigate to the desired revision and press
[Select].
This will open the partial show loading screen in the CIA.
From this screen you can select which aspects of the show file you wish to load. The touchbuttons
at the center of the CIA represent all of the show aspects that you can choose to load. By default all
aspects are selected (gray) and will be loaded. To withhold any show aspects from loading, simply
deselect them in the CIA by touching the respective button.
To reselect all show aspects, press the {Reset} touchbutton and all buttons will return to gray
(selected). To stop the show load process, press the {Cancel} button.
When you have selected/deselected all of the show aspects you require, press the {OK}
touchbutton.
Eos loads the selected show to the console.
N o t e : On a partial show open, if any record targets are not opened, any existing data of
that type will remain stored on the console.
Deselected show aspects