ETC Eos v1.3 - Manual (Page 250)

236 Eos Operations Manual
Scaled Parked Values in Live
A scaled parked value allows the intensity output (only) to be modified proportionally in live. Scaled
park values are ignored when storing a record target. The setting on the display indicates what
should be stored, not the actual scaled value. An example of how to set a scaled parked value in
live includes:
• [3] [At] [/] [1] [2] [5] [Park] [Enter] - sets a scaled value of 125% on channel 3 intensity. In
other words, whenever channel 3 is active, it will be active 25% higher than its current setting.
• [3] [At] [/] [8] [5] [Park] [Enter] - sets a scaled value for channel 3. Whenever channel 3 is
active, it will playback 15% lower than its current setting.
Remove the scaled parked value:
• [3] [At] [/] [Park] [Enter] - unparks a scaled intensity for channel 3.
• [Park] [Enter] - unparks all parked channels.
A channel can have both a scaled parked value and a parked intensity value. Keep in mind that the
parked intensity has priority over (and overrides) scaled park values. A channel can have a parked
value or a scaled park value, but not both.
Parked Addresses in Live
DMX addresses can be parked in Live. When in live, an {Address} softkey exists beneath the CIA
and is accessible by using the [More SK] button.
Below are some examples of parking an address in live:
• <More SK> {Address} [5] [At] [5] [0] [Park] [Enter] - parks output 5 at 50% intensity.
• <More SK> {Address} [5] [Park] [Enter] - unparks output 5.
• <More SK> {Address} [Park] [Enter] - unparks all parked outputs.