ETC Eos v1.3 - Manual (Page 261)

21
Using About 247
<About> [number] [Enter]
This displays information about the specified channel. Pressing [About] is not required if the about
display in the CIA is already open. You can select the information you wish to view from the four
touchbuttons located on the right side of the CIA. The touchbuttons are:
{Current Value} displays information that indicates:
• Cue the channel was first used in
• Cue the channel was last used in
• number of cue lists the channel is used in
• when was the most recent move (of any parameter)
• when was the preceding move (of any parameter)
• what the channel is inhibited by (if anything)
• a list of parameters available on the channel and information about them.
{Background Value} displays the same information, but from other sources that do not currently
have control of the channel.
{Patch} displays the following information:
• the channel’s address range
• the proportional patch level
• curve (if any)
• swap status
• invert pan/tilt status
• any keywords associated with the channel
{Advanced Control} displays all parameters associated with the channel and access lamp
controls (if it is a moving light).
<About> [Cue] [number] [Enter]
The following information will be displayed:
• if the cue is active and what fader it is playing on
• timing data for the cue (including discrete timing)
• any effects running
• number of move instructions in the cue
• what channels move in the cue