Selecting displays, Moving displays, Scrolling within a display – ETC Eos v1.3 User Manual
Page 47: Expanding displays
3
System Basics
33
Selecting Displays
When a display is selected, the screen is highlighted in a gold border and the display name (such
as “1. Live Channel”) will be in gold as well. When a display is not selected, there is no border and
the tab name is grey.
If a display is already open, it can be selected in the following ways:
• Press [Tab] to change focus from the currently selected tab to the tab immediately to the right.
If no tabs are to the right, the selection moves to the first tab on the left of all available monitors.
• Press [Tab] & [n], where “n” represents the tab number of the desired tab.
• Press [Live] or [Blind] to automatically bring live/blind into focus.
• Double press a record target button (such as [Preset] or [Submaster]) to either open the
associated display or select it if it is already open.
Moving Displays
To move the active display from one monitor to another, press and hold the [Tab] key and use the
page arrow keys to move the display in the direction of the desired screen. One press of the left or
right page keys will move the display to the next screen in that direction. To move it back, press the
opposite arrow key.
Scrolling within a Display
By default the page keys will advance/retreat a display by one page per press. However, to scroll
through displays you may press the [Scroll Lock] key on the keypad. The LED on the button
illuminates red when in scroll lock mode.
Scroll lock is a toggle state. When scroll lock is first pressed:
• [Page
T
] - scrolls table, spreadsheet and channel views down
• [Page
S
] - scrolls table, spreadsheet and channel views down
• [Page
X
] - scrolls table and spreadsheet views right
• [Page
W
] - scrolls table and spreadsheet views left
Expanding Displays
[Expand] allows a tab to be viewed across multiple external monitors.
To expand a display to an adjacent monitor, press [Expand] & [Page
X
] or [Expand] & [Page
S
].
To collapse an expanded view press [Expand] & [Page
W
] or [Expand] & [Page
T
].
Note:
Please note that you must have a minimum of two (2) external monitors attached
to your Eos to use the [Expand] feature.
If the display you are expanding is at the right most position, the display will
expand onto the first (or left most) monitor.