Using the browser, Virtual keypad – ETC Eos v1.3 User Manual
Page 41
3
System Basics
27
Using the Browser
To use the browser, you must first draw focus to it by touching anywhere in the browser area of the
CIA. If the browser is not visible, press the [Displays] key and then the {Browser} softkey to open
the browser.
When focus is on the browser, the window border highlights in gold. The scroll lock LED illuminates
red and the paging keys will now control selection in the browser.
• Use the page arrow keys to move the selection bar up and down the list.
• When the bar highlights the desired menu, press [Page
X
] to open the menu.
• Continue pressing [Page
X
] to open submenus.
• Scroll to the item you wish to open using [Page
S
] or [Page
T
] and then press [Select]. You
may also touch the item you wish to open and then press [Select].
• If you wish to close a submenu scroll to that item and press [Page
W
].
• To draw focus to the browser at any time, press any area within it.
Virtual Keypad
It is possible to open a touch keypad in the CIA which mimics the hard keys found on the actual Eos
keypad. This virtual keypad is accessible from the browser.
The browser path to the virtual keypad is Browser>Virtual Controls>Virtual Keyboard.
Following this path will open the virtual keypad, giving you touch access to the Eos hardkeys on the
CIA. The browser and parameter display will be hidden from view while the virtual keypad is open.
To close the virtual keypad, press the [Displays] button, to the right of the CIA.
Menu Arrows
Opened Menu
Sub Menus
Scroll Bar
Selection Bar