Move to, Edit – ETC Eos v1.3 User Manual
Page 198
184
Eos Operations Manual
Move To
The {Move To} softkey is used to move cues from one location in a cue list to another location in the
same or even a different cue list. When cues are moved, values that had tracked will be matched to
the previous cue and will be auto-blocked by the system. The impact on subsequent cues is based
on track/cue only conventions.
The following example illustrates the use of the {Move To} softkey in the cue list index:
• <Cue> [1] [/] [2] {Move To} <Cue> [2] [/] [1] [Enter] - moves the selected cue 2 from cue list
1 to the new list 2. When a cue list is moved, any links that referenced the cue list are changed
accordingly.
Alternatively, you could use [Copy To] to copy the content of the cue to another cue or cue list.
Edit
The {Edit} softkey opens a blind channel view of the selected cue and changes focus from the cue
list index. You can change the blind display to spreadsheet or table view by pressing the [Format]
key. You can edit any of the cue attributes for the cue selected in the index, but the cue contents
must be edited in the blind display.