ETC Eos v1.3 - Manual (Page 31)

1
System Overview 17
Outputting DMX
In order to output control levels from your console, you must connect a Net3 gateway or Net2 node.
If your device receives Net3 or ETCNet2 directly, no gateway or node is required.
Nodes and gateways must be given an IP address before they can function with Eos. This may
require using NCE (Network Configuration Editor) and a Windows
®
PC to configure the gateways
or nodes. The NCE Software CD and related user manuals and setup guides shipped with your
gateway or node. Use these materials to prepare them for use with Eos.
For more information on Net3 gateways or Net2 nodes, see the product literature that accompanied
the hardware or download it from our website at
www.etcconnect.com.