ETC Eos v1.3 - Manual (Page 227)

17
Multipart Cues 213
Setting Multipart Cue Attributes
Cue attributes, such as [Time], [Delay], [Block], [Assert], [Label], [Hold] and [Rate], [Mark], and
[AutoMark Off] can be assigned in part cues. They are stored and function exactly as they do in
single part cues.
Cue part attributes can be defined as the parts are recorded, or they can be added after the part has
been created. For example:
• [Record] [Cue] [2] [Part] [1] [Delay] [8] [Enter]
• [Cue] [4] [Part] [3] {Color} [Time] [6] [Enter]
• [Cue] [8] [Part] [9] {AutoMark Off} [Enter]
• [Record Only] [Cue] [5] [Part] [2] [Assert] [Enter]
For more on cue attributes, see Assigning Cue Attributes, page 155 .