12 visualisation with »visiwinnet – Lenze c300 User Manual
Page 100
Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
100
12
Visualisation with »VisiWinNET®«
12.3
Using the visualisation to access data of the control/parameters
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• CAN OPC tunnel
• CAN Remote OPC tunnel (remote access)
• EtherCAT OPC tunnel
• EtherCAT Remote OPC tunnel (remote access)
Field device parameters at the CAN bus
Field device parameters at the EtherCAT bus
Note: The (Remote) SoftPLC OPC Tunnel communication
type requires a separate configuration of the controller
(experts only - please contact Lenze if required!).
• SoftPLC OPC tunnel
• SoftPLC Remote OPC tunnel (remote access)
PLC (Logic/Motion) data
Communication type / description
Access to ...