5 error messages after a device replacement, Error messages after a device replacement – Lenze c300 User Manual
Page 78
Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
78
10
Device replacement - replacing the controller (in the event of
service)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
10.5
Error messages after a device replacement
Message
Information / remedy
Backup/restore cannot be copied. Not
enough free memory on the data medium.
The SD card used has not enough free memory space to
execute a safety backup. Delete non-required data from
the SD card and try it again.
The replacement device is not compatible
with the original device. Device
migration was not successful.
In order to replace a device, the devices have to be
compatible.
Which replacement device is suitable for the
Inserted SD card has higher version than
the system. Please update the controller
first.
Update the Controller firmware. Afterwards, you can
replace the device.
After the device replacement: Automatic data update
Error while creating the backup for device
replacement. Please try again.
An error has occurred while creating a backup. Please try
again.
Migration failed. Please check your
configuration.
The migration of the databases failed. Please contact
your manufacturer.