Lenze c300 - Manual (Page 109)

12 Visualisation with »VisiWinNET®«
12.4 Use the Direct driver "LogicAndMotionV3" (local visualisation)
109
Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12.4.6 Transferring an application to the target device
In order to be able to transfer an application to the target device, you have to start the
»VisiWinNET®« Remote Access Manager.
For this purpose, activate parameter 97, "Activate VisiWinNET Remote Access " in »WebConfig«.

Alternatively, the »VisiWinNET®« Remote Access Manager can be started via the user
interface of an optional monitor panel:
1. Change to the service mode.
Start the control panel: F1 key on the monitor panel or key combination: <Shift>+<F4>
2. Double-click the »VisiWinNET®« Remote Access icon to start the Remote Access Manager.

How to transfer an application to the target device:
1. Go to the »VisiWinNET®« menu bar
and select ProjectTransmit to target device.
The Connect device window appears.
2. Enter the IP address or network name.
You can view and alter the IP address of the controller in the "Network Connections"
program.
 Configuring the controller ( 33)
3. Click the Connect button.
The application is transferred to the target device.

Note!
If the firewall of Windows®XP/7 is active, you have to enable a port for »VisiWinNET®«. In
the standard setting this is port 10116.