Lenze c300 - Manual (Page 138)

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
138
13 Parameter reference
13.2 Basic parameters of the Controllers 3200 C/c300 and p300/p500
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C0079
C0085
C0086
C0090
C0091
Parameter | Name:
C0079 | Used flash memory
Data type: UNSIGNED_32
Index: 24496
d
= 5FB0
h
Flash memory occupied
Display range
(min. value | unit | max. value)
0 Bytes 4294967295
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0085 | NTP: Activate network time protocol AutoUpdate
Data type: UNSIGNED_32
Index: 24490
d
= 5FAA
h
Activate global time levelling with an NTP server. Internet connection of the controller required.
Setting range
(min. value | unit | max. value) Lenze setting
0 1 0
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0086 | NTP: NTP server
Data type: VISIBLE_STRING
Index: 24489
d
= 5FA9
h
Address of the NTP server to be used by the controller for global system time levelling.
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0090 | System: Date and time
Data type: DATE
Index: 24485
d
= 5FA5
h
Date and time
Setting range
(min. value | unit | max. value) Lenze setting
NaN
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0091 | Local date and time
Data type: DATE
Index: 24484
d
= 5FA4
h
Local date and time.
Setting range
(min. value | unit | max. value) Lenze setting
NaN
 Read access  Write access  CINH  PLC-STOP  No transfer