Lenze c300 - Manual (Page 161)

13 Parameter reference
13.4 Ethernet (on board)
161
Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
13.4 Ethernet (on board)
This chapter provides a list of all parameters of the Ethernet interface (on board) of the controllers
in numerically ascending order.
C0238
C0240
C0241
C0242
C0243
Parameter | Name:
C0238 | Apply IP configuration
Data type: UNSIGNED_16
Index: 24337
d
= 5F11
h
Parameter for the activation of the set IP configuration.
Selection list
(Lenze setting printed in bold) Info
1 Activate device
0 No command
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0240 | Enable Dhcp
Data type: UNSIGNED_32
Index: 24335
d
= 5F0F
h
Activation of the configuration. DHCP states:
• "0" = Inactive
• "1" = Active
If DHCP is active, parameters 241-245 do not have any function
Setting range
(min. value | unit | max. value) Lenze setting
0 1 0
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0241 | IP address
Data type: VISIBLE_STRING
Index: 24334
d
= 5F0E
h
IP address of the interface
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0242 | Subnet mask
Data type: VISIBLE_STRING
Index: 24333
d
= 5F0D
h
Subnet mask of the interface
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0243 | Default gateway
Data type: VISIBLE_STRING
Index: 24332
d
= 5F0C
h
Default gateway of the interface
 Read access  Write access  CINH  PLC-STOP  No transfer