2 windows® xp/xp embedded operating system, 12 visualisation with »visiwinnet – Lenze c300 User Manual
Page 122
Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
122
12
Visualisation with »VisiWinNET®«
12.7
OPC tunnel for external visualisation (remote access)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12.7.2
Windows® XP/XP Embedded operating system
The »VisiWinNET®« runtime of the external
Windows® XP/XP Embedded controller
accesses (via OPC tunnel 1) the OPC servers of
the Controller.
Note!
There is no OPC server available for PROFIBUS and PROFINET.
Controller c300/p300:
• The OPC communication for »VisiWinNET« is exclusively available for Controller p300
without PLC.
• Otherwise, only the Lenze "Logic&Motion" direct driver can be used for the data
exchange between »VisiWinNET« and PLC.