Lenze c300 - Manual (Page 84)

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
84
11 Remote maintenance and diagnostics
11.2 Diagnostics via Telnet
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

How to establish a telnet connection to the controller:
1. Start the command line on the PC by means of which you want to log in,
2. Start buttonExecute,
3. Establish the telnet connection to the controller: Start telnet <IP address> of the controller.
4. The user name and password for the authentication must correspond to the data stored in
the user management, parameters 101 to 170.