Lenze c300 - Manual (Page 110)

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
110
12 Visualisation with »VisiWinNET®«
12.4 Use the Direct driver "LogicAndMotionV3" (local visualisation)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12.4.7 Start the »VisiWinNET®«
The »VisiWinNET®« Project Manager manages the »VisiWinNET®« project data of the target device
(visualisation controller).

Click the »VisiWinNET®« Project Manager icon to start the Project Manager.
[12-1] »VisiWinNET®« Project Manager on the controller (Windows® CE)
• Click the Run button to start the selected project. (Corresponds to the Start project
command in »VisiWinNET®«)
• The Set AutoStart button sets the project as start project in »VisiWinNET®«.
This will cause the controller to load this project automatically when the system is started.