Lenze c300 - Manual (Page 113)

12 Visualisation with »VisiWinNET®«
12.6 OPC tunnel for local visualisation (integrated control system)
113
Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12.6.1 Integrating the OPC tunnel in »VisiWinNET®«
The OPC tunnel is the communication channel between »VisiWinNET®« and the OPC servers of the
controller. The desired OPC tunnel must be integrated into the project.

How to integrate the OPC server into the project:
1. Open the Project Explorer.
2. Select the entry New in the context menu of the node VariablesChannels.
• Select "OPC server" as Channel type.
• Select the OPC server/driver by clicking the
button.
• Select the Lenze OPC tunnel (Lenze.Digitec.OPCTunnel.DA).
3. Confirm your selection by clicking the OK button.
The OPC tunnel can be selected in the Project Explorer.

Note!
The OPC tunnel cannot be integrated by means of the menu navigation (during the
creation of a new project).
Integrate the OPC tunnel by means of the Project Explorer. Then the OPC tunnel can be
configured.