Lenze c300 - Manual (Page 42)

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
42
5 Commissioning the controller
5.6 Tabs of the I/O modules at the backplane bus
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.6 Tabs of the I/O modules at the backplane bus
The Workspace ...
• uses various tabs to display the properties and settings of the module selected from the Device
view.
• serves to edit the parameters of the individual I/O compound modules.
Depending on the module selected from the Device view, different tabs are available in the
Workspace.
I/O module coupler (backplane bus)
Every I/O module at the backplane bus is represented by means of the following tab:
I/O compound modules
Tab Contents
Diagnostics Error status of the modules.
 Error messages (backplane bus) ( 43)
I/O module coupler List of all available objects for the parameter setting of the I/O compound
modules - digital I/O.
Status Status information of the module coupler.
Information Project information and catalogue information of the module coupler.
Tab Contents
Parameter • Offline configuration of the I/O module
• All parameters of the I/O compound module
• Parameterising digital modules:
Polarity of the control signals, status in the event of an error for digital
output modules.
• Parameterising analog modules:
Signal functions, status in the event of an error.
Depending on the type of I/O module, specific settings are possible.
Further information is provided in the online help of the I/O system 1000.
I/O module image Process image of the I/O module
Status Status information of the I/O compound module.
Information Designation and connection diagram of the I/O compound module.