Lenze c300 - Manual (Page 47)

6 Parameter setting using »WebConfig«
6.4 Start »WebConfig«
47
Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
The Properties of internet protocol (TCP/IP) dialog window

How to set the browser:
1. Open the browser at the Engineering PC.
(This setting refers to the Microsoft Internet Explorer.)
2. Select the Proxy settings dialog window:
(ToolsInternet options ConnectionsSettingsAdvanced)
3. Position the cursor in the Exceptions field at the end of the entries available.
4. Enter the IP address of the controller: <;192.168.5*> (Lenze setting)
5. Close the individual dialog windows with OK.
6.4 Start »WebConfig«
Start a browser at the Engineering PC and enter the IP address of the controller.
1. Enter <User name:password>. As default
setting, admin:admin is preselected. Any
user set up on the controller can log in.
 User management ( 55)
2. Confirm with OK .
3. Afterwards, »WebConfig« is visible.
 User interface of »WebConfig« ( 48)