Lenze c300 - Manual (Page 57)

6 Parameter setting using »WebConfig«
6.5 User interface of »WebConfig«
57
Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.5.7.2 Optional PROFIBUS/PROFINET communication cards
6.5.8 Automatic update
In this menu, the automatic, interval-controlled update of the screen content can be activated:
6.5.9 Language selection
The desired language settings can be selected in the Language section.
The language settings take immediate effect.
6.5.10 Parameter list buttons
Button Function
MC-xxx
MC-PBM: Parameter of the PROFIBUS master card communication card.
MC-PBS: Parameter of the PROFIBUS slave card communication card.
MC-PND: Parameter of the PROFINET communication card.
In this user interface, the parameters of an optional communication card are
visible if it is installed in the controller.
Detailed information on the parameters of the communication cards can be
found here:
 PROFIBUS and PROFINET communication cards ( 185)
Interval:
Specify period in seconds, defining the intervals in which the screen content is
automatically updated; example value: 5, update every five seconds.
Active:
Tick the checkmark (  ) to activate the automatic update.
Button Function
Accept Accept data.
After a system restart changed data is lost, as it is not persisted
automatically.
Accept & Save all Accept and save all changed data.
The data will remain on your PC after a system restart.
Update Reload data and update screen content.