Lenze c300 - Manual (Page 86)

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
86
11 Remote maintenance and diagnostics
11.3 Data transfer via FTP
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11.3.1 FTP settings with the »WebConfig«
The settings of the FTP connection can be managed via the web-based parameterisation. From
parameters 171 to 174 the FTP access for the controller can be activated and user rights can be
specified. Click the Remote control button to call the FTP settings:
• Parameter 171 activates authentication of the FTP user,
• Parameter 172 enables log-on of the anonymous FTP user "Anonymous",
• Parameter 173 activates the upload of files by anonymous FTP users,
• Parameter 174 activates the FTP service.
The user management, the User management button, specifies the following:
• The Windows® CE users who are allowed to use the FTP access.
• Which authorisations the Windows® CE users have.
The authorisations are required to be able to connect to the controller via FTP.

Note!
Restart the FTP server to accept the changed settings: click the Device commands
button.
• Send the "Stop FTP server" command. The FTP server is stopped.
• Send the "Start FTP server" command. The FTP server is started with the changed
settings.
• Send the "Update FTP server" command to update information to the FTP server.