Canon REALiS X600 - Manual (Page 102)

User Command Specifications ９．Details of command GET RGBGAIN
1 GET RGBGAIN
GET RGBGAIN
GET□RGBGAIN
?△RGBGAIN
For all other responses, refer to "Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the ZCONTDRV command and FCONTDRV command. ）
(2) The RGB gain can be set using the RGBGAIN command .
> GET RGBGAIN or ? RGBGAIN
< g:RGBGAIN=-10, 0, 19
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－ － －
Ч ○ Ч
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
X600
× ○
SX60
○ ○
－ － － －
SX6 ○ ○ ○ ○ ○ ○ ○
－ － － － SX50 － － －
S-Video D-Video SCART None A-RGB1 A-RGB2 Comp Video
RGB gain adjustment value inquiry
Model Power supply Input Mode
Remote Local
Remarks
D-RGB
This command is used to inquire about the current RGB gain adjustment values.
Setting
Number
SX60 X600
Control Mode Reference Commands
Function
Format
Description
Response
× ○ ○ ○
g:RGBGAIN=<R adjustment value：Number>▽<G adjustment value：Number>▽<B
adjustment value：Number>
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
supported
Example
０１．００** ０１．０１** ０１．０１** ０１．０１**
SX50 SX6
PAGE 94