Canon REALiS X600 - Manual (Page 91)

User Command Specifications 9．Details of command GET IMAGE
1 GET IMAGE
GET IMAGE
GET□IMAGE
?△IMAGE
g:IMAGE=<Image mode：ＩＤ>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The image mode settings can be selected by the IMAGE command.
> GET IMAGE or ? IMAGE
< g:IMAGE=CINEMA
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
○ ×
MOVIE_PHOTO Movie & Photo
HOME_CINEMA Home theater
Ч Ч
Ч ○
Ч Ч
○ ○
Ч Ч
MOVIE Movie Ч Ч
ADOBE ADOBE RGB × ○
○ ○
CINEMA Cinema
SRGB sRGB ○ ○
Ч Ч
○ ○
○ ○
Ч
ID
Parameter Meaning
Errors supported by model
SX50 SX6 SX60
○
○
○
X600
SX60
○ ○ × ○ ○ ○ ○ SX6 ○ ○ ○
– ○ ○ × SX50 ○ ○ ○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power Input Mode
Remote Local
Image mode inquiry
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
○ ○ ○ ○
01.00** 01.01** 01.01** 01.01**
Commands
Function
Description
Response
Standard ○ ○
PRESENTATION
○ ○ ○ –
Reference
Example
Format
SX60 X600 SX50 SX6
This inquires about the current image mode.
Presentation ○
Commands
supported
Mode Control Setting
X600
STANDARD
PAGE 83