Canon REALiS X600 - Manual (Page 158)

User Command Specifications ９．Details of command RANGE RGBOFFSET
1 RANGE RGBOFFSET
RANGE RGBOFFSET
RANGE□RGBOFFSET
For all other responses, refer to "Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the ZCONTDRV command and FCONTDRV command. ）
(2) The RGB offset can be set using the RGBOFFSET command .
> RANGE RGBOFFSET
< r:RGBOFFSET=N, -20, 20, -20, 20, -20, 20
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－ － －
Ч ○ Ч
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Commands
supported
X600
SX60
○ ○ ○ × ○ ○ ○ ○ SX6 ○ ○ ○
－ － － － － － － － SX50 － － －
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power supply Input Mode
Remote Local
RGB offset adjustment range inquiry
Reference Setting Control Mode
r:RGBOFFSET=N, <R minimum value>, <R maximum value>, <G minimum value>, <G
maximum value>, <B minimum value>, <B maximum value>
SX50 SX6
This command is used to inquire about the current RGB offset adjustment values.
Number
SX60 X600
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
Function
Format
Example
Description
Response
０１．００** ０１．０１** ０１．０１** ０１．０１**
× ○ ○ ○
PAGE 150