Canon REALiS X600 - Manual (Page 166)

User Command Specifications 9．Details of command RANGE MUTE
1 RANGE MUTE
RANGE MUTE
RANGE□MUTE
r:MUTE=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE MUTE
< r:MUTE=I, ON, OFF
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
(Refer to the ZCONTDRV command and FCONTDRV command.)
Mute control can be set by the MUTE command.
Commands
supported
Mode Control Setting Reference
Example
Description
Response
This inquires about the parameter options which enable mute control to be set.
ID
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
Commands
Function
Format
Mute control setting option request
SX50 SX6 SX60 X600
01.00** 01.01** 01.01** 01.01**
○ ○ ○ ○
SCART None
Mode
Remote Local
Remarks
SX50 ○ ○ ○
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video
○ × ○ ○ ○ – – ○
SX6 ○ ○ ○ ○ × ○ ○ ○ ○ ○ ○
SX60
X600
PAGE 158