Canon REALiS X600 - Manual (Page 84)

User Command Specifications 9．Details of command GET INPUT
1 GET INPUT
GET INPUT
GET□INPUT
?△INPUT
g:INPUT=<Input type: ID>
For all other responses, refer to "Error List."
-1 This inquiry can be made in the power-on status.
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
With the SX50, the inquiry can be made in the remote mode only.
-2 The input selection can be controlled by the INPUT command.
> GET INPUT or ? INPUT
< g:INPUT=VIDEO
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
D-RGB
○ ○
○ ○ ○
○ ○ ○
○
X600
○ ○
○ ○
○ ○
○ ○ ○
ID
○
SCARTRGB SCART(RGB) × ○
D-VIDEO Digital Video ×
S-VIDEO S-Video ○ ○
VIDEO Video ○ ○
○ A-RGB2 A-RGB2
COMP Component
○
○
○ ○
Reference
SX60 X600
SX50 SX6
A-RGB1 ○
○ –
Video S-Video D-Video
01.01**
SX50 SX6
Commands
Function
Format
Description
Response
This inquires about the current input selection.
Input selection inquiry
Commands
supported
○ ○ ○ ○
01.00** 01.01** 01.01**
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp
Mode
Remote Local
Remarks
SCART None
SX50 ○ ○ ○ – ○ ○ ○ ○ ×
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
SX60
X600
Mode Control Setting
Example
Meaning
Errors supported by model
SX60
D-RGB
Input type
A-RGB1
PAGE 76