Canon REALiS X600 - Manual (Page 154)

User Command Specifications 9．Details of command RANGE WBRGB
1 RANGE WBRGB
RANGE WBRGB
RANGE□WBRGB
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE WBRGB
< r:WBRGB=N, -20, 20, -20, 20, -20, 20
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Commands
supported
Reference
r:WBRGB=N, <R minimum value>, <R maximum value>, <G minimum value>,
<G maximum value>, <B minimum value>, <B maximum value>
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
Screen color correction (adjustment) range request
Mode Control Setting
SX50 SX6
This inquires about the range within which the screen color correction (adjustment) can be set.
Number
SX60 X600
(Refer to the ZCONTDRV command and FCONTDRV command.)
The screen color correction (adjustment) can be set by the WBRGB command.
Commands
Function
Format
Example
Description
Response
01.00** 01.01** 01.01** 01.01**
○ ○ ○ ○
Model Power Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 ○ ○ ○ ○ × ○ ○ ○ – – ○
SX6 ○ ○ ○ ○ × ○ ○ ○ ○ ○ ○
SX60
X600
PAGE 146