Canon REALiS X600 - Manual (Page 92)

User Command Specifications 9．Details of command GET BRI
1 GET BRI
GET BRI
GET□BRI
?△BRI
g:BRI=<Brightness：Number>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The brightness can be set by the BRI command.
> GET BRI or ? BRI
< g:BRI=-10
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
SX60 X600 SX50 SX6
–
This inquires about the current brightness value setting.
01.00** 01.01** 01.01** 01.01**
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Remarks
Description
Response
○ ○
Model Power Input
D-RGB A-RGB1 A-RGB2
Number
Commands
Function
Format
Brightness value setting inquiry
Reference
○ ○ ○ ○
Mode
Remote Local SCART None
SX50 ○ ○ ○ – ○
Comp Video
○
S-Video D-Video
○ ×
SX6 ○ ○ ○ × ○ ○ ○ ○ ○ ○ ○
SX60
X600
Example
Commands
supported
Control Setting Mode
PAGE 84