Canon REALiS X600 - Manual (Page 157)

User Command Specifications ９．Details of command RANGE RGBGAIN
1 RANGE RGBGAIN
RANGE RGBGAIN
RANGE□RGBGAIN
For all other responses, refer to "Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the ZCONTDRV command and FCONTDRV command. ）
(2) The RGB gain can be set using the RGBGAIN command .
> RANGE RGBGAIN
< r:RGBGAIN=N, -20, 20, -20, 20, -20, 20
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－ － －
Ч ○ Ч
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
r:RGBGAIN=N, <R minimum value>, <R maximum value>, <G minimum value>, <G
maximum value>, <B minimum value>, <B maximum value>
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
supported
× ○ ○ ○
０１．００** ０１．０１** ０１．０１** ０１．０１**
Commands
Function
Format
Example
Description
Response
SX50 SX6
This command is used to inquire about the range in which the RGB gain adjustment can be set.
Setting
Number
SX60 X600
Control Mode Reference
RGB gain adjustment range request
Model Power supply Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 － － － － － － － － －
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○
－ －
SX60
× ○
X600
PAGE 149