Canon REALiS X600 - Manual (Page 29)

User Command Specifications 9. Details of command DOTS
1 DOTS
DOTS
DOTS=<Number of dots: Number>
Number of dots
1 This designates the total number of dots for one horizontal period.
-1
A "busy" response is given while the zoom or focus lens is being driven.
Furthermore, it may not be possible to execute the command with some input signals.
-2
Menu
[Display settings] - [Input signal settings] - [Total number of dots adjustments]
[Display settings] - [Input signal settings] - [Total number of dots]
-3
Setting
> DOTS=1650 The total number of dots is 1650.
< i:OK
Reference
> GET DOTS or ?DOTS This retrieves the total number of dots.
< g:DOTS=1200
Obtain settable parameter range (Min, Max)
> RANGE ＤＯＴＳ
< r:DOTS=N, 0, 4096
Any value from 0 to 4096 can be set for the total dots.
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.
* If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
Commands
supported
Control Setting Reference
For details, refer to the RANGE command.
SX6
SX60
X600
For all other responses, refer to "Error List."
(Refer to the ZCONTDRV command and FCONTDRV command.)
Example
Response
This command is the same as the menu functions in the table below.
The GET command can be used to obtain the current total number of dots.
It can be executed when the projector is in both the remote mode and power-on status at the
same time.
SX50
For details, refer to the GET command.
Model
Total number of dots adjustment
"i:OK" is returned if the parameter was set properly.
Description
Commands
Function
Parameter
Format
Mode
Number
The RANGE command can be used to obtain the parameter range that can be set at
that time.
SX50
○ ○
SX6 SX60 X600
01.01** 01.01** 01.00** 01.01**
○ ○
Model Power Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 Ч ○ ○ Ч Ч Ч – – Ч ○ Ч
SX6 Ч ○ ○ Ч ○ Ч Ч Ч Ч Ч
SX60
X600
×
PAGE 21