Canon REALiS X600 - Manual (Page 52)

User Command Specifications ９．Details of command 6AXADJ
1 6AXADJ
6AXADJ
6AXADJ=<6-axis adjustment parameter：ＩＤ>
For details, refer to the RANGE command .
For all other responses, refer to "Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the ZCONTDRV command and FCONTDRV command. ）
(2)
(3)
(4)
(5)
For details, refer to the GET command .
Control
> 6AXADJ=ON The 6-axis adjustment is set to ON.
< i:OK
Reference
> GET 6AXADJ or ?6AXADJ The 6-axis adjustment ON or OFF setting is obtained.
< g:6AXADJ=ON
Acquisition of parameters which can be set
> RANGE 6AXADJ
< r:6AXADJ=I,ON,OFF
The 6-axis adjustment can be set as "ON" or "OFF."
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:0002 INVALID_COMMAND" is returned.
Supported Command States
OFF ON PM
－ － －
Ч ○ Ч
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
SX50
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video
０１．０１**
None SCART
X600
The parameters which can be set at any given point in time can be obtained using the
RANGE command.
Model Power supply Input Mode
Remote Local D-Video
Example
Commands
supported
SX50 SX6
０１．００** ０１．０１**
ON This sets the 6-axis adjustment to ON.
OFF This sets the 6-axis adjustment to OFF.
"i:OK" is returned if the parameter was set properly.
It can be executed when the projector is in both the remote mode and power-on status at the same
time.
In the case of "6-axis adjustment," set the hue and color saturation of each axis using the 6AXR to
Y "6-axis correction R to Y hue/color saturation setting" commands.
０１．０１**
The current 6-axis adjustment setting can be obtained using the GET command.
This command functions in the same way as when "Image adjustments" - "6-axis adjustment" are
selected on the menu.
SX60
Commands
Function
Parameter
Description
Format
Response
Reference Mode
This sets the currently selected input signal and image mode.
This command is used to select ON or OFF for the 6-axis adjustment.
6-axis adjustment ON/OFF
Control Setting
ID
Parameter Meaning
× ○ ○ ○
－ － － － － － － － － － －
SX6 ○ ○ ○ ○ ○ × ○ ○ ○ ○
SX60
X600
○
PAGE 44