Canon REALiS X600 - Manual (Page 108)

User Command Specifications 9．Details of command GET LAMP
1 GET LAMP
GET LAMP
GET□LAMP
?□LAMP
g:LAMP=<Setting：ＩＤ>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The lamp output can be set by the LAMP command.
> GET LAMP or ? LAMP
< g:LAMP=NORMAL
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Commands
Function
Format
Lamp output setting inquiry
Setting Reference
Description
Response
Setting Meaning
NORMAL Normal
SILENT Silent cooling
This inquires about the current lamp output setting.
ID
Mode Control
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
SX50 SX6 SX60 X600
01.00** 01.01** 01.01** 01.01**
○ ○
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp Video
Mode
Remote Local
Remarks
S-Video D-Video SCART None
SX50 ○ ○ ○ ○ ○ ○ – – ○ ○ ×
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ×
SX60
X600
Commands
supported
Example
○ ○
PAGE 100