Canon REALiS X600 - Manual (Page 171)

User Command Specifications 9．Details of command RANGE NOSIG
1 RANGE NOSIG
RANGE NOSIG
RANGE□PJON
r:NOSIG=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE NOSIG
< r:NOSIG=I, BLACK, BLUE, LOGO
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Commands
supported
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The display screen when there are no signals can be set by the NOSIG command.
ID
Example
Description
Response
01.00**
Commands
Function
Format
Display screen when there are no signals setting option request
Mode Control Setting Reference
This inquires about the parameter options which enable the display screen when there are no signals to
be set.
SX50 SX6 SX60 X600
○ ○ ○ ○
01.01** 01.01** 01.01**
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp Video
Mode
Remote Local
Remarks
S-Video D-Video SCART None
SX50 ○ ○ ○ ○ ○ ○ – – ○ ○ ×
SX6 ○ ○ ○ × ○ ○ ○ ○ ○ ○ ○
SX60
X600
PAGE 163