Canon REALiS X600 - Manual (Page 83)

User Command Specifications ９．Details of command GET BLANK
1 GET BLANK
GET BLANK
For all other responses, refer to "Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the ZCONTDRV command and FCONTDRV command. ）
(2) The BLANK setting can be controlled using the BLANK command .
> GET BLANK or ? BLANK
< g:BLANK=ON
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－ － －
Ч ○ Ч
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
○ ○
X600
SX60
○ × ○ ○ ○ ○ SX6 ○ ○ ○
- － － － SX50 － － －
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power supply Input Mode
Remote Local
× ○ ○ ○
０１．０１**
?△BLANK
This command is used to inquire about the current BLANK status.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
g:BLANK=<BLANK status：ＩＤ>
Commands
Function
Format
Description
Response
－ － － -
GET□BLANK
０１．００** ０１．０１** ０１．０１**
BLANK release underway
SX60 X600
Setting Control Mode
BLANK status inquiry
Reference
SX50 SX6
Example
ＩＤ
BLANK status Status
Commands
supported
ON BLANK underway
OFF
PAGE 75