Canon REALiS X600 - Manual (Page 72)

User Command Specifications ９．Details of command LEDILLUMINATE
1 LEDILLUMINATE
LEDILLUMINATE
LEDILLUMINATE=<LED lighting control setting parameter：ＩＤ>
LED lighting control setting parameters
For details, refer to the RANGE command .
For all other responses, refer to "Error List."
This command is used to control the lighting of the emotional LED and signal sensing LED.
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the ZCONTDRV command and FCONTDRV command. ）
(2)
(3)
For details, refer to the GET command .
Setting
> LEDILLUMINATE=ON The LED display is set to ON.
< i:OK
Reference
> GET LEDILLUMINATE or ?LEDILLUMINATE
< g:LEDILLUMINATE=ON
Acquisition of parameters which can be set
> RANGE LEDILLUMINATE
< r:LEDILLUMINATE=I, ON, OFF
"ON" or "OFF" can be set for the LED display.
*Commands are indicated by ">", and responses are indicated by "<".
○ ○ ○
When a command is not supported, "e:0002 INVALID_COMMAND" is returned.
Supported Command States
OFF ON PM
－ － －
Ч ○ Ч
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
The ON or OFF setting for the LED display is
obtained.
Commands
supported
Meaning
This sets the LED display to ON.
This sets the LED display to OFF.
The parameters which can be set at any given point in time can be obtained using the
RANGE command.
Parameter
The current LED illumination setting can be obtained using the GET command.
ON
Description
Commands
Function
Parameter
Format
Example
"i:OK" is returned if the parameter was set properly. Response
It can be executed when the projector is in both the remote mode and power-on status at the same
time.
Control
This command functions in the same way as when "System settings" - "LED illumination" are
selected on the menu.
Setting Reference
Emotional LED and signal sensing LED lighting control
Mode
ＩＤ
OFF
０１．００** ０１．０１** ０１．０１** ０１．０１**
SX50 SX6 SX60 X600
Model Power supply Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 － － － － － － － － － － －
SX6 ○ ○ ○ ○ × ○ ○ ○ ○ ○
SX60
X600
○
PAGE 64