Remote – Canon REALiS X600 User Manual

Page 22

Advertising
background image

User Command Specifications

9. Details of command REMOTE

1

REMOTE

REMOTE

REMOTE

None

"i:OK" is returned when it was possible to switch the mode properly.

This switches to Remote mode.

-1

-2

However, zoom or focus lens drive stops if the zoom or focus lens is being driven.

-3

-4

-5 When this command is executed, all the statuses and settings listed below are cleared.

Digital zoom

Presentation timer display

Spotlight display

Screen temporary off (NoShow)

Freeze image (Freeze)

Command now being executed (except during "user image registration")

Focusing, zooming underway (with the SX6, SX60 and X600)

-6

-7

Mode switching

> REMOTE
< i:OK

Mode viewing

>
< g:MODE=LOCAL

* Commands are indicated by ">", and responses are indicated by "<".

Supported Command States

OFF ON

PM

Mode Control Setting Reference

Commands

supported

(Refer to the ZCONTDRV command and FCONTDRV command.)

(Refer to the LOCAL command.)

For all other responses, refer to "Error List."

"Guide display" is not cleared by the transfer of operation to the remote mode. If necessary,
clear the display using the GUIDE command.
The current mode can be referenced using the applicable GET command.

GET MODE or

SX50

SX6

SX60

X600

01.00**

01.01**

01.01**

01.01**

Model

Power

Commands

Function

Parameter

Switch to Remote mode

Format

Example

Response

Description

During Remote mode, all buttons are disabled except for the front panel and remote control
POWER button.

If, in the power management standby status, the "REMOTE" command was received and
operation was switched to the remote mode, the "power-on" (lamp lighted) status is established
unconditionally.

This command can be used in any projector mode.

With the SX50, the setting, control and reference commands except for RC and MAIN can be
used only in the remote mode.
(RC and MAIN can be used only in the "local mode.")
With the SX6, SX60 and X600, there are several setting, control and reference commands
which can be used in the local mode.

Input

D-Video SCART

None

Remarks

D-RGB A-RGB1 A-RGB2 Comp

Video S-Video

Mode

Remote Local

SX50

SX6

SX60

X600

PAGE 14

Advertising
This manual is related to the following products: