Canon REALiS X600 - Manual (Page 148)

User Command Specifications 9．Details of command RANGE CONT
1 RANGE CONT
RANGE CONT
RANGE□CONT
r:CONT=N, <Minimum setting value>, <Maximum setting value>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE CONT
< r:CONT=N, -20, 20
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Commands
supported
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The contrast can be set by the CONT command.
01.01** 01.01** 01.01**
○ ○
SX50 SX6
This inquires about the range within which the contrast can be set.
01.00**
SX60
Number
Mode Control Setting Reference Commands
Function
Format
Example
Description
Response
Contrast setting range request
Model Power Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 ○ ○ ○ – ○ ○ Ч
○ ○ Ч ○ ○ ○ ○
X600
○ SX6 ○ ○ ○
SX60
X600
○ ○ ○
○ ○
–
PAGE 140