Canon REALiS X600 - Manual (Page 168)

User Command Specifications 9 .Details of command RANGE IMAGEFLIP
1 RANGE IMAGEFLIP
RANGE IMAGEFLIP
RANGE□IMAGEFLIP
r:IMAGEFLIP=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE IMAGEFLIP
< r:IMAGEFLIP=I, NONE, CEILING, REAR, REAR_SEILING
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
○
X600
SX60
× ○ ○ ○ ○ ○ ○ SX6 ○ ○ ○
○ ○ × ○ ○ ○ – – SX50 ○ ○ ○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power Input Mode
Remote Local
○ ○ ○ ○
01.00** 01.01** 01.01** 01.01**
Control Setting
SX50 SX6 SX60 X600
Mode
Function
Format
Flip display setting option request
This inquires about the parameter options which enable the flip display to be set.
ID
The flip display can be set using the IMAGEFLIP command.
Commands
supported
Reference
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
Example
Description
Response
Commands
PAGE 160