Canon REALiS X600 - Manual (Page 99)

User Command Specifications 9．Details of command GET WBRGB
1 GET WBRGB
GET WBRGB
GET□WBRGB
?△WBRGB
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The screen color correction (adjustment) can be set by the WBRGB command.
> GET WBRGB or ? WBRGB
< g:WBRGB=10, 0, 19
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
X600
SX60
× ○ ○ ○ ○ ○ ○ ○ SX6 ○ ○ ○
– ○ ○ × ○ ○ ○ – SX50 ○ ○ ○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power Input Mode
Remote Local
01.01** 01.01**
○ ○ ○ ○
Number
SX60 X600
g:WBRGB=<R adjustment value: Number>▽<G adjustment value: Number>▽<B
adjustment value: Number>
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
SX6 SX50
This inquires about the current screen color correction (adjustment).
Screen color correction (adjustment) inquiry
Mode Control Setting Reference
Commands
supported
Commands
Function
Format
Description
Response
01.00**
Example
01.01**
PAGE 91