Canon REALiS X600 - Manual (Page 116)

User Command Specifications 9．Details of command GET NOSIG
1 GET NOSIG
GET NOSIG
GET□NOSIG
?△NOSIG
g:NOSIG=<Setting：ＩＤ>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The display screen when there are no signals can be set by the NOSIG command.
> GET NOSIG or ? NOSIG
< g:NOSIG=LOGO
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
X600
SX60
○ ○ ○ × ○ ○ ○ ○ SX6 ○ ○ ○
– ○ ○ × ○ ○ ○ – SX50 ○ ○ ○
S-Video D-Video SCART None
Mode
Remote Local
Remarks
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp Video
○ ○ ○ ○
01.00** 01.01** 01.01** 01.01**
User screen
SX50 SX6 SX60 X600
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Reference
This inquires about the current setting for the screen to be displayed when there are no signals.
Black screen
BLUE Blue screen
LOGO
ID
Setting Meaning
BLACK
Mode Control Setting
Screen displayed at startup with no signals setting inquiry
Commands
supported
Example
Commands
Function
Format
Description
Response
PAGE 108