Canon REALiS X600 - Manual (Page 122)

User Command Specifications 9．Details of command GET RCCH
1 GET RCCH
GET RCCH
GET□RCCH
?△RCCH
g:RCCH=<Setting：ＩＤ>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 Remote control can be set by the RCCH command.
> GET RCCH or ? RCCH This inquires about the current remote control setting.
< g:RCCH=1
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Setting Meaning
2 Remote control channel 2
1 Remote control channel 1
Description
Response
This inquires about the current remote control setting.
ID
01.01**
Commands
Function
Format
Remote control setting inquiry
Reference Mode
SX50 SX6 SX60 X600
01.01**
○ ○ ○ ○
01.00** 01.01**
Model Power Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 ○ ○ ○ ○ ○ ○ – – ○ ○ ×
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ×
SX60
Example
X600
Commands
supported
Setting Control
PAGE 114