Canon REALiS X600 - Manual (Page 95)

User Command Specifications 9．Details of command GET GAMMA
1 GET GAMMA
GET GAMMA
GET□GAMMA
?△GAMMA
g:GAMMA=<Gamma adjustment value：Number>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The gamma adjustment value can be set by the GAMMA command.
> GET GAMMA or ? GAMMA
< g:GAMMA=3
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
X600
SX60
× ○ ○ ○ ○ ○ ○ ○ SX6 ○ ○ ○
– ○ ○ × SX50 ○ ○ ○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power Input Mode
Remote Local
01.01** 01.01** 01.01**
○ ○ ○ ○
Commands
Function
Format
Description
Response
Gamma adjustment value inquiry
Mode Control Setting Reference
○ ○ ○ –
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
supported
Number
Example
SX60 X600 SX50 SX6
This inquires about the current gamma adjustment value.
01.00**
PAGE 87