Canon REALiS X600 - Manual (Page 132)

User Command Specifications ９．Details of command GET ROMVER
1 GET ROMVER
GET ROMVER
GET□ROMVER
?△ROMVER
g:ROMVER="<ROM VERSION：Character string>"
<ROM VERSION> := 99.9999
-1 This inquiry can be executed in any status provided that AC power is supplied to the projector.
> GET ROMVER or ? ROMVER
< g:ROMVER="01.0306"
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
○ ○ ○
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
For the "SX50," the projector must be in the remote mode and power-on status.
X600
○ ○
01.01**
○ ○
SX50 SX6 SX60
01.00** 01.01** 01.01**
Commands
Function
Format
ROM version inquiry
Mode Control Setting Reference
Description
Response
This inquires about the product name of the projector.
Character
string
For all other responses, refer to "Error List."
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video
Mode
Remote Local
Remarks
SCART None
SX50 ○ ○ ○ ○ ○ ○ – – ○ ○ ×
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
X600
Commands
supported
Example
SX60
PAGE 124