ThingMagic M5e-Compact - Manual (Page 133)

Application Tag Commands
Command Set 133
“Reset ReadProtect” is received. This command uses only the common fields and is
invoked with the following command:
The response to the Set ReadProtect command is a simple ACK with standard status:
Set ReadProtect embedded in a Read Tag Multiple take the following form:
Reset ReadProtect
The NXP command Reset ReadProtect restores normal operation to a tag which is in
ReadProtect mode. This command uses only the common fields and is invoked with the
following command:
FF 10 2D 03 E8 02 44 00 01 00 00 00 78 08 34 11 22 33 44 ?? ??
SOH Length OpCode Timeout (ms) Chip
Type
Option Sub
Cmd
Select Data Address Select
Length Selct
Data Access Password CRC
FF 04 2D 00 00 02 44 00 01 ?? ??
SOH Length OpCode Status Chip
Type
Option Sub
Cmd
CRC
FF 1C 22 04 00 04 03 E8 11 22 33 44 00 00 00 78 08 34
SOH Length OpCode Options
(EPC Mem)
Search
Flags
Timeout Access Password Select Data Address
(bits)
Select
Data
Length
(bits) Select
Data
01 0A 2D 00 00 02 40 00 01 11 22 33 44 ?? ??
Embd
Cmd
Count Embd
Cmd
Length Embd
Cmd
OpCode Embd Cmd
Timeout
(Not Used)
Chip
Type Option Sub Cmd Access Password) CRC