Set user gpio outputs (96h) – ThingMagic M5e-Compact User Manual
Page 159
Set Application Commands
Command Set
159
Set Regulatory Hop Time Command Fields (Option = 0x01)
Note
Option=0x00 is reserved and not the same as when no option is specified.
Set User GPIO Outputs (96h)
There are two GPIO outputs available for use. The Set User GPIO Outputs command
has been “overloaded” to create a mechanism to return the current state of both GPIO
pins. To set either GPIO Output pin, send the following command. Note that the data
length is 2 bytes:
Field
Value
Description
Length
0x05
Number of bytes after OpCode
OpCode
0x95
Set Frequency Hop Table
Option
0x01
Indicates the Regulatory Hop Time will be passed.
Regulatory Hop
Time
[4 bytes]
The time between frequency hops, in milli-seconds, to be
used for the defined hop table.
Note:
The max hop time is restricted by regulatory limits based
on the region set via
FF
02
96
01
01
28
E0
SOH
Length
OpCode
GPIO #
Output Value
CRC