ThingMagic M5e-Compact - Manual (Page 174)

Get Application Commands
174 Command Set
Get Current Tag Protocol (63h)
The Get Current Tag Protocol command returns the currently set tag protocol(s). This is
the protocol being used by the reader. The following table assigns a 16-bit code to each
available protocol. This table will be updated as new protocols are added:
The command format is shown in the following example:
Note
The M5e and M5e-Compact only support GEN2
The reply is similar to the Set Current Tag Protocol command. Only one protocol can be
set at a time:
Protocol Name 16-bit Code
None Selected 0x0000
EPC0 / EPC0+ Matrics 0x0001
EPC1 0x0002
ISO 18000-6B 0x0003
EPC0+ Impinj 0x0004
GEN2 0x0005
UCODE 0x0006
FF 00 63 1D 6C
SOH Length OpCode CRC
FF 02 63 00 00 00 01 21 42
SOH Length OpCode Status Current Protocol CRC