ThingMagic M5e-Compact - Manual (Page 205)

Demo Application
Appendix B: Getting Started - Devkit 205
read tags. For example, to use a one-port configuration that uses only port 1, use the Set
Antenna Port
command:
C:\> ArbSer –msg 02 91 01 01
< Equivalent to: FF 02 91 01 01 70 3B >
Valid message received:
Data Length = 00
OpCode = 91
Status = 00 00
CRC = 1758
Finally, the module is ready to execute a read command. The timeout for the read can be
set anywhere from 0 ms to 65,536 ms. Using the Read Single Tag ID command, the
timeout is set to 1 s, which is 1000 ms (0x03E8):